8 Most Common Issues of broken Glass Mosaic Tile Backsplash
2021.10.16 / By hqt
Handling of Glass Mosaic Tile Backsplash want efficient, long lasting, you need to understand the causes, from which the new application is suitable remedial measures. Here are the causes, effects and the most effective treatment. Please read along to follow to understand and be most accurate.
Causes of broken Glass Mosaic Tile Backsplash
In any case, before starting to handle it, you need to understand what the cause is to find the best solution. With broken tiles, there are #8 most common causes which are:
- The compaction of the foundation before tiling is not done carefully, the foundation has not achieved the best hardness and certainty, leading to the appearance of porosity after the tile installation.
- The watering Glass Mosaic Tile Backsplash is not done evenly, there are places not. Where there is not, there will be no connection between the floor and the tile, so it is easy to be pressed.
- Brick has just finished construction and has traveled on the surface leading to uneven links, high places and low places.
Causing the sand to drift down
- Due to the subsidence of the ground, the house next door built the foundation deeper than the house's foundation, causing the house to sink.
- The base mortar is too dry, so when watering the cement on the mortar, all the water is absorbed.
- After a long time of use, the building structure of the Glass Mosaic Tile Backsplash appears degraded, causing uneven settlement when subjected to too large a load.
- The erratic ambient temperature causes the tiles to expand, creating pressure that causes the bricks to collide with each other, leading to the phenomenon of being blocked in the middle.
- Ron brick degraded, peeling makes water penetrate deep into the floor, after time the brick is chipped.
What are the harmful effects of chipped bricks?
Glass Mosaic Tile Backsplash is a condition in which the floor is swollen. It is higher than normal, in addition, when moving on the floor, there will be a very uncomfortable blistering sound. This situation causes the following two main problems:
- Aesthetically: the brickwork is extremely unsightly, giving the space a lack of professionalism, elegance and sophistication.
- In terms of safety: high and low surfaces cause entanglement when moving, easy to stumble, especially families with young children and the elderly will be very dangerous. This long-term situation also affects the entire structure of the house.
Simple and effective way to handle chipped tiles
There are two simple ways to deal with broken Glass Mosaic Tile Backsplash, saving time and money while still ensuring the effectiveness that you can apply: using tile adhesive or cement mortar.
#first. Use tile glue
This treatment is used in case the bricks are pressed at a small angle. This plan is simple, fast, highly effective and durable, so it is considered the most optimal today.
- Dedicated serrated bay
- Scrape off the veins of the tiles
- Pump tile glue or use 502 glue and use a rubber hammer to lightly tap the brick to make the glue flow evenly into the gap.
- Wait for the glue to harden, you will see that the tile is no longer pressed.
- After being injected with glue, it fills and minimizes the gap between the brick and the paving surface.
- The use of tile adhesive can also easily adjust the position of the brick in a short time.
#2. Treating Glass Mosaic Tile Backsplash with cement mortar
Cement is a common material in Glass Mosaic Tile Backsplash construction. It is good for many different purposes for high efficiency and simple use. However, in the case of brick processing, it is quite difficult and complicated. This method requires the operator to ensure the process and time to compact the ground first, and also to closely check both quantity and quality of mortar.
In addition, the distance between the bricks must be wide enough. The circuit between the bricks must be full so that the bricks do not crack when expanding. In places where the width is less than a brick, the constructor should apply the "dragon scale" method, that is, using rubble to pave to increase the width of the mortar joints.
Should I use Glass Mosaic Tile Backsplash?
The main function of the Glass Mosaic Tile Backsplash is to wrap and separate the space to create a boundary for the house or garden, in addition, it also helps to protect the house from the eyes of the bad guys. So, should I use wall tiles? This is a concern of many homeowners today. Nowadays, it is not difficult for us to see solid.
Modern fences, especially in big cities. In rural areas, people still think that tiling for fences is unnecessary, both costly and wasteful. Therefore, it can be said that the use of bricks for wall cladding or not depends on the preferences and needs of the homeowner, this is not mandatory.
Should I use fence tiles?
However, we also cannot deny the great effects when the fence is tiled, which are:
- Increase the aesthetics and elegance of the house
- Avoid moss, mold, peeling due to direct impact of the weather, thereby prolonging the life of the wall.
Easier to clean: The wall is just built up and then slapped and painted. When it gets dirty, it can only be cleaned by applying a new layer of paint. If you are using bricks, it can be easily cleaned and scrubbed.
Choose tiles with a simple and harmonious design
No matter what area you choose to use, you need to make sure Glass Mosaic Tile Backsplash is in harmony. It comes with the overall surrounding space. Choose simple colors politely so that it balances with the overall. It also minimizes the selection of bright, colorful colors. It is to avoid losing the aesthetics as well as difficult to combine with other colors.
If you are still wondering what type of brick to choose for your fence. Don't worry, take a look at Gachmosaic.info 's #5 suggestions below.
Conclusion Glass Mosaic Tile Backsplash
Like bricks used for other areas, Glass Mosaic Tile Backsplash also have many codes with many different sizes. Choosing the tile size for this area is not strict, you are free to choose so that you feel it fits the architecture of the house as well as your preferences.